Tuesday, November 28, 2017

Renault Citroen Peugeot PIN code read with Lonsdor K518ISE



Lonsdor K518ISE pin code reading coverage on Renault, Citroen & Peugeot:
for Renault pin code coverage, the Renal system has fixed pin code to choose, Renault Immobilizer System 2  only for Renault Koleos after 2011 year which needs to remove the immo;
for Citroen and Peugeot pin code coverage, the old type is not supported, for example, 206 and 207.

Lonsdor K518ISE Renault coverage:

Lonsdor K518ISE Citroen coverage:

Lonsdor K518ISE Peugeot coverage:


The above coverage is for reference, any questions click on www.uobdii.com and click Live Support to get instant reply, or contact email at Sales@UOBDII.com for best price.

Good luck with you.

Saturday, November 25, 2017

Lonsdor K518 Program Key for Porsche Cayenne

This post talk about how to use Lonsdor K518 Key programmer program key for Porsche Cayenne,and the article main include 4 parts:

Function
Reference
Attention
Operation.

Procedure of Lonsdor K518 program key for Porsche Cayenne

Function
1. Program smart key: to program smart card (please make dealer key first);
2. Make dealer key: use the backed up BIN data to make the non-dedicated key to be dealer key.
Reference
Chip type: Dedicated smart card
Frequency: 315/433/434 frequency (please check the logo in the lower right of the lid of the BCM box)
Key embryo no.: 31
Code requirement:Dismantle & read BCM to make dealer key
Key generation: Program smart key complete, remote will automatically generated
 Under the steering wheel (BCM position):

BCM is located at the bottom left of the steering wheel, please note the frequency type, basically there will be 315/433/434,
The following picture is for 434 frequency:

11-15 Cayenne Car Model

The car key
The induction keyhole


The mechanical knob key inserted into the induction keyhole




Attention
1. All the keys need to learn, or it will not be able to start the vehicle, it is recommended to learn the original car keys first,and then learn the new key, battery must be well installed.
2. The newly added key must be either the dealer key made via the car BCM data, or the key ordered back through the VIN code.
3. When learning key, it is required to insert the key into the induction keyhole, to learn a smart key, remove the machanical rotate key from the induction keyhole if any and then insert the smart key to program.
Operation
Step 1: Use the programmer to read and write BCM data and save it as bin file;
1. BCM is located in the lower left of the steering wheel, please pay attention to view the frequency type, usually there will be 315,433,434 frequency (below picture is for 434):



2. Read the BIN (D-FLASH / EEPROM) file with the programmer specifically for reading BCM. Please pay attention to the type here: namely 1L15Y 2M25J metal crystal, or 5M48H 1N35H ceramic crystal (red mark):



3. Please refer to the following picture to wire:



Step 2: Copy the bin file into K518ISE: please use the USB cable to connect the K518ISE to the computer, open the device internal memory, find the folder "customfile" and copy the bin file into it (as shows below).

Note: bin file suffix "bin" must be lower case letters, directly put the file into the folder rather than create a new folder:
11
Step 3: Make dealer key
Step 4: Program smart key

http://www.uobdii.com/wholesale/lonsdor-k518ise-key-programmer.html

Friday, November 24, 2017

Lonsdor K518 Program IMMO2 Smart Key for Renault

This post is the Lonsdor K518 official help file,it show the procedures of how to use lonsdor k518 program immo2 smart key for renault.

This help file basically includes 4 parts: Function, Attention, Reference and
Operation.

More about lonsdor k518:
http://www.uobdii.com/wholesale/lonsdor-k518ise-key-programmer.html

Function
1. Program smart key
2. Collision recovery: If the car collided, the system will automatically start the
protection program, and after repair, you need to cancel the protection via this
function to start the vehicle.
Note:
"IMMO 2" generally only for the Koleos models, if failed to program, for
2010-before models, please enter the "IMMO 1" to program (for pin code, it is
recommended to select group 4 first). For other Renault models please select
"IMMO 1" to program, if the pin code is wrong, please switch ignition on and
wait for 1 minute or so to try another group of pin code again. The wrong code
prompt will be "Login failed" or "system does not support login operation".

Attention
1. "IMMO 2" generally only for the Koleos models, if failed to program, for
2010-before models, please enter the "IMMO 1" to program (for pin code, it is
recommended to select group 4 first). For other Renault models please select
"IMMO 1" to program, if the pin code is wrong, please switch ignition on and
wait for 1 minute or so to try another group of pin code again. The wrong code
prompt will be "Login failed" or "system does not support login operation".
2. The low voltage when programming will lead to the operation prompt “Login
failed”;
3. For Megane models pin code, it is recommended to choose group 2;
4. For 2011-after Koleos, after the dismantle&read data process, if there is
prompt that”Login failed” during programming, please turn on ignition and wait
for not less than a minute, if program again, please follow the device prompt to
insert key when necessary.
Reference
Chip model: Dedicated 46 chip(For Keleos it is suggest to use 7952 smart key,
for Renault models it is basically the same)
Remote type: Dedicated smart key
Key embryo no.: Dedicated small smart key/ Keleos No.53
PIN code requirement: Dedicated smart key
Remote generation: Program smart key complete, remote will automatically
generated
OBD position:
Under the steering wheel(below is Keleos)
(Renault models OBD positions are basically located under the steering
wheel, in front of the gear, or under the central armrest box)
For Scenic: push the central armrest box to the right, under the cover:
Keleos 2011-after car model:

The car key

For Keleos smart key, the induction key slot lies in front of the gear:
Operation
Program smart key
1. click the start button, open the driver door;
2. The system is obtaining the pin code, if the car model is obtainable, please
select the pin code. If can’t be identified, please use the programmer to read
the onboard computer EEPROM data into the host, the specific operation is
as follows:
① With the USB cable to connect K518ISE host to the computer, the computer
will show the host internal storage;
② Copy the .bin (lowercase) format files to the host's customfile directory;
③ Return to the smart key programming operation, select the import file for
secret read.
3. Insert the smart key to be programmed, program the first key completed, to
program
more, please follow the prompts to proceed;
4. If not continue programming, remove the smart key, program complete.
Collision recovery
If the car collided, the system will automatically start the protection program,
and after
repairing, it is required to cancel the protection via this function to start the
vehicle.
Step 1: Connect the device; Step 2: System communicating to clear fault
information; Step 3: Complete.
Dismantle & read direction:
1. For Koleos 2010 and before can be programmed directly, for
2011-after cars require to
Dismantle & read to backup EEPROM data (under the bottom left of steering
wheel):

Keleos BCM:
2.Please follow the wiring diagram on the programmer to wire(below for
reference only):

Read the bin file, import it into K518: Please use the USB cable
to connect K518ISE with computer, open the device internal memory, find the
folder "customfile" and put BIN file into it.
(Note: Bin file suffix "bin" must be in lowercase, it is required to put the file
directly into
the folder, instead of creating a new folder):
4. The file is imported, please program.

Thursday, November 23, 2017

Lonsdor K518 Add New Key & Program Key All Key Lost for Toyota Corolla G chip



This post focus on the topic of how to use Lonsdor K518 add new key or program key all lost for Toyota Corolla G chip.

Add new key(2010 key chip)
1.Perform this function you need a master key.
Insert the key into the ignition,if the immo light does not light on,the key is master key.And if the immo light light on about 1 second and the off,the key is spare key.

2. Insert master key into the ignition,and turn it to ON,then waiting system communicating...
3. Insert the key you want to add(dont need to turn the key)
4. Waiting for system programming,it will complete after a few seconds

Delete Keys(2010 chip)
Perform this function you need a master key.
Insert master key into the ignition,and turn it to ON,then waiting system communicating...
Insert the key you want to add(dont need to turn the key)
Waiting for system programming,then deleting complete

Reset IMMO(for all key lost)
Note:After performing this operation,it no need to reprogram immo controller(2010 chip)

After reset the immo controller,it will restore to default status.
Turn off ignition,turn on ignition
System programming,pls follow guide to turn on or turn off the ignition...pull out key.
Please complete below step within 120s:
1 Program 2 master keys and 1 spare key
  Insert first master key,turn ignition to on position and waiting for 5 seconds.
  Insert second master key,turn ignition to on position and waiting for 4 seconds.
  Insert thirdly spare key,turn ignition to on position and waiting for 5 seconds,then the immo light off,the programming complete.

Tuesday, November 21, 2017

Lonsdor K518ISE on VAG 2010- all keys lost?



Question: Does Lonsdor K518ISE support VAG all key lost?
Answer: Only support a part. Support 4th Immo system 202AD key. In another word, as long as the 4th IMMO can be read out data successfully by 202AD.


Actually, it's hard to express in words especially if the users are not skilled. Besides it requires Lonsdor engineer qualified tech support.
Anyone who has interest VAG 2010- all keys lost with Lonsdor K518ISE, email at Sales@UOBDII.com for tech support.