Saturday, December 9, 2017

Lonsdor K518ISE free update news on what makes and year can work

Lonsdor K518ISE engineers recently tested a number of cars and verified working great, below are test reports, please update your machine for free of charge.


Lonsdor K518ISE free update news on what makes and year can work:
2017 Buick GL8 Smart key programming
Fiat Ottimo toothless knob key programming via OBD
Rolls- Royce Wraith, Ghost key programming

Wednesday, December 6, 2017

Lonsdor K518 Program Key for Ferrari F12



This article show the guide on how to use Lonsdor K518 program key for Ferrari F12.And at the begin of the article you will get the Ferrari F12 function overview.


Ferrari Key Programming function operation procedures:
Immobilizer data backup which is prepare for generating dealer keys.
Programming keys
Programming remote keys function
Write the immo data into the new key.

Sunday, December 3, 2017

Lonsdor K518ISE product service center: calculate key data easily

Lonsdor K518ISE product service center is designed to help users to calculate key data whenever and wherever. The users are free to login with email and password as they will in Chinese and English. So far it can calculate data for Volvo, Maserati etc by self-service without Lonsdor engineer help.

Guide:

2. Please enter the email and password (Must be the account when you register K518ISE)


 3.Choose product "Lonsdor K518ISE"


4. Choose the car brand you want to calculate data, i.e Volvo.

 5. Choose the key type (i.e key (Non folding), that is the common key of S40, C30, C70)


6. Calculate key data operation
Bellow operation applies to other keys.
1). Input the serial number that you are using.
2) Choose the car model i.e S40, C30, C70 etc.
3) Input the right No.(2) data, then the left NO.(1) data.
4) Submit.
Note: read "Help" at the bottom for instruction.


7. The system automatically calculate data and the page will automatically refresh until the result displays.
Tip: If the data is put in the incorrect position or incorrect, the data will be calculated unsuccessfully.


8. Lonsdor K518ISE calculate key data for Volvo successfully, please click on "Download data", and follow the "Operating guide" to input the corresponding folder.

Friday, December 1, 2017

Lonsdor K518:VW IMMO5 Key Programming

This article focus on the topic of Lonsdor K518 VW IMMO5 Key programming.Follow the guide to learn the tips of VW IMMO5 via Lonsdor K518.

VW IMMO5 Key Programming Procedures:
1. Backup immodata: read and save immodata;
2. Make dealer key: write the saved immodata into an blank key, to make it a dedicated key that can be programmed;
3.Key learn: key programming operation;
4. Clear airbag fault code: clear the airbag fault tips on the car dashboard.

Support vehicle reference:
A4 2012
A8 12 - 2016
A4L 2015 smart card

Attention
1. All keys need to learn, or it won’t be able to start the vehicle, it is recommended to learn the original car keys and then learn the new key, make sure battery is well installed.
2. The newly added key must be either the dealer key made via the car BCM data, or the key ordered back through the VIN code.
3. When learning key, it is required to insert the key into the induction keyhole, to learn a smart key, remove the machanical rotate key from the induction keyhole if any and then insert the smart key to program.

Tuesday, November 28, 2017

Renault Citroen Peugeot PIN code read with Lonsdor K518ISE



Lonsdor K518ISE pin code reading coverage on Renault, Citroen & Peugeot:
for Renault pin code coverage, the Renal system has fixed pin code to choose, Renault Immobilizer System 2  only for Renault Koleos after 2011 year which needs to remove the immo;
for Citroen and Peugeot pin code coverage, the old type is not supported, for example, 206 and 207.

Lonsdor K518ISE Renault coverage:

Lonsdor K518ISE Citroen coverage:

Lonsdor K518ISE Peugeot coverage:


The above coverage is for reference, any questions click on www.uobdii.com and click Live Support to get instant reply, or contact email at Sales@UOBDII.com for best price.

Good luck with you.

Saturday, November 25, 2017

Lonsdor K518 Program Key for Porsche Cayenne

This post talk about how to use Lonsdor K518 Key programmer program key for Porsche Cayenne,and the article main include 4 parts:

Function
Reference
Attention
Operation.

Procedure of Lonsdor K518 program key for Porsche Cayenne

Function
1. Program smart key: to program smart card (please make dealer key first);
2. Make dealer key: use the backed up BIN data to make the non-dedicated key to be dealer key.
Reference
Chip type: Dedicated smart card
Frequency: 315/433/434 frequency (please check the logo in the lower right of the lid of the BCM box)
Key embryo no.: 31
Code requirement:Dismantle & read BCM to make dealer key
Key generation: Program smart key complete, remote will automatically generated
 Under the steering wheel (BCM position):

BCM is located at the bottom left of the steering wheel, please note the frequency type, basically there will be 315/433/434,
The following picture is for 434 frequency:

11-15 Cayenne Car Model

The car key
The induction keyhole


The mechanical knob key inserted into the induction keyhole




Attention
1. All the keys need to learn, or it will not be able to start the vehicle, it is recommended to learn the original car keys first,and then learn the new key, battery must be well installed.
2. The newly added key must be either the dealer key made via the car BCM data, or the key ordered back through the VIN code.
3. When learning key, it is required to insert the key into the induction keyhole, to learn a smart key, remove the machanical rotate key from the induction keyhole if any and then insert the smart key to program.
Operation
Step 1: Use the programmer to read and write BCM data and save it as bin file;
1. BCM is located in the lower left of the steering wheel, please pay attention to view the frequency type, usually there will be 315,433,434 frequency (below picture is for 434):



2. Read the BIN (D-FLASH / EEPROM) file with the programmer specifically for reading BCM. Please pay attention to the type here: namely 1L15Y 2M25J metal crystal, or 5M48H 1N35H ceramic crystal (red mark):



3. Please refer to the following picture to wire:



Step 2: Copy the bin file into K518ISE: please use the USB cable to connect the K518ISE to the computer, open the device internal memory, find the folder "customfile" and copy the bin file into it (as shows below).

Note: bin file suffix "bin" must be lower case letters, directly put the file into the folder rather than create a new folder:
11
Step 3: Make dealer key
Step 4: Program smart key

http://www.uobdii.com/wholesale/lonsdor-k518ise-key-programmer.html

Friday, November 24, 2017

Lonsdor K518 Program IMMO2 Smart Key for Renault

This post is the Lonsdor K518 official help file,it show the procedures of how to use lonsdor k518 program immo2 smart key for renault.

This help file basically includes 4 parts: Function, Attention, Reference and
Operation.

More about lonsdor k518:
http://www.uobdii.com/wholesale/lonsdor-k518ise-key-programmer.html

Function
1. Program smart key
2. Collision recovery: If the car collided, the system will automatically start the
protection program, and after repair, you need to cancel the protection via this
function to start the vehicle.
Note:
"IMMO 2" generally only for the Koleos models, if failed to program, for
2010-before models, please enter the "IMMO 1" to program (for pin code, it is
recommended to select group 4 first). For other Renault models please select
"IMMO 1" to program, if the pin code is wrong, please switch ignition on and
wait for 1 minute or so to try another group of pin code again. The wrong code
prompt will be "Login failed" or "system does not support login operation".

Attention
1. "IMMO 2" generally only for the Koleos models, if failed to program, for
2010-before models, please enter the "IMMO 1" to program (for pin code, it is
recommended to select group 4 first). For other Renault models please select
"IMMO 1" to program, if the pin code is wrong, please switch ignition on and
wait for 1 minute or so to try another group of pin code again. The wrong code
prompt will be "Login failed" or "system does not support login operation".
2. The low voltage when programming will lead to the operation prompt “Login
failed”;
3. For Megane models pin code, it is recommended to choose group 2;
4. For 2011-after Koleos, after the dismantle&read data process, if there is
prompt that”Login failed” during programming, please turn on ignition and wait
for not less than a minute, if program again, please follow the device prompt to
insert key when necessary.
Reference
Chip model: Dedicated 46 chip(For Keleos it is suggest to use 7952 smart key,
for Renault models it is basically the same)
Remote type: Dedicated smart key
Key embryo no.: Dedicated small smart key/ Keleos No.53
PIN code requirement: Dedicated smart key
Remote generation: Program smart key complete, remote will automatically
generated
OBD position:
Under the steering wheel(below is Keleos)
(Renault models OBD positions are basically located under the steering
wheel, in front of the gear, or under the central armrest box)
For Scenic: push the central armrest box to the right, under the cover:
Keleos 2011-after car model:

The car key

For Keleos smart key, the induction key slot lies in front of the gear:
Operation
Program smart key
1. click the start button, open the driver door;
2. The system is obtaining the pin code, if the car model is obtainable, please
select the pin code. If can’t be identified, please use the programmer to read
the onboard computer EEPROM data into the host, the specific operation is
as follows:
① With the USB cable to connect K518ISE host to the computer, the computer
will show the host internal storage;
② Copy the .bin (lowercase) format files to the host's customfile directory;
③ Return to the smart key programming operation, select the import file for
secret read.
3. Insert the smart key to be programmed, program the first key completed, to
program
more, please follow the prompts to proceed;
4. If not continue programming, remove the smart key, program complete.
Collision recovery
If the car collided, the system will automatically start the protection program,
and after
repairing, it is required to cancel the protection via this function to start the
vehicle.
Step 1: Connect the device; Step 2: System communicating to clear fault
information; Step 3: Complete.
Dismantle & read direction:
1. For Koleos 2010 and before can be programmed directly, for
2011-after cars require to
Dismantle & read to backup EEPROM data (under the bottom left of steering
wheel):

Keleos BCM:
2.Please follow the wiring diagram on the programmer to wire(below for
reference only):

Read the bin file, import it into K518: Please use the USB cable
to connect K518ISE with computer, open the device internal memory, find the
folder "customfile" and put BIN file into it.
(Note: Bin file suffix "bin" must be in lowercase, it is required to put the file
directly into
the folder, instead of creating a new folder):
4. The file is imported, please program.